-
G0 Non-Frame Hardened Steel Block (for GG3-S)
*Lead time is currently 8-10 weeks*
This is a properly-sized steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis.
The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations.Note: this block is for GG3-S owners with the hardware upgrade. GG3 owners without the hardware upgrade should purchase the G0 Non-Frame Block for GG3.
Details:
- Material: 4140 Steel
- Sizing: 1.25″ W x 1.75″ H x 7″ L
Note: either GG3-S or GG3 with free firmware upgrade is required for G0.
$80.04 -
G0 Starter Kit
Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net
$270.00 – $455.00 -
G0 Special Parts Kit
*Lead time is currently 8-10 weeks*
The G0 Special Parts Kit contains all special lower parts required to assemble the G0 that aren’t already included in a standard G19-style Gen3 lower parts kit.
These parts are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
Note that these special parts are also included in the G0 Grip Module product.
$5.54G0 Special Parts Kit
$5.54 -
G0 Grip Module
*Lead time is currently 8-10 weeks*
The G0 grip module is a SLS printed grip that the G0 chassis installs into, in order to complete the lower part of the G0 pistol.
This product also includes the G0 Special Parts kit, a series of pins and springs required to secure the G19 LPK into the milled G0 chassis. These are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 Gen 3 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
This grip module is made from high-quality SLS, which is heat resistant and will facilitate G0 longevity. You can also print your own grip module at home using the file available for free at DEFCAD.com.
Note: this product does not include the pins needed to install the assembled chassis into the grip module. These pins are instead included in any G19 Gen 3-style lower parts kit.
$69.99G0 Grip Module
$69.99 -
G0 Fixture Plates
*Lead time is currently 8-10 weeks*
Spare or replacement set of Fixture plates (2) for use with the Universal Clamps for G0 operations.
$40.00G0 Fixture Plates
$40.00 -
G0 Non-Frame Stainless Steel Block (for GG3)
*Lead time is currently 8-10 weeks*
This is a properly-sized 303 stainless steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis.
The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations.Note: this block is for GG3 owners without the GG3-S hardware upgrade. It is not as strong as the GG3-S block. GG3-S owners with the hardware upgrade should purchase the G0 Non-Frame Block for GG3-S.
Details:
- Material: 303 stainless steel
- Sizing: 1.25″ W x 1.75″ H x 7″ L
Note: either GG3-S or GG3 with free firmware upgrade is required for G0.
$29.95 -
G0 Build Kit (Without Grip Module)
This product is for customers that have already completed the G0 chassis system with the G0 Starter Kit
Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net
$279.99 -
G0 Build Kit With Grip Module
This product is for customers that have already completed the G0 chassis system with the G0 Starter Kit
Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net
$349.99G0 Build Kit With Grip Module
$349.99
