So you’ve decided to build your first AR, but what tools do you need to do the job? The simple answer? These. We give you the tools you need to finish your build.
With this kit, you get an AR mag well vise block, a pin punch set, an armorer’s wrench, and a brass gunsmith’s hammer. All you need to come up with are a vise, anti-seize compound, lithium grease, and an afternoon to get your build on.
Mag Vise Block:
Made from high-grade polymer
Will not crush or distort when held in a vise
Pin Punch Set
Made from chrome moly vanadium steel
Will not bend or break when used properly
Armorer’s Wrench
Heavy duty steel
Barrel nut wrench
Muzzle break wrench
Install or disassemble nuts, compensators and buffer tubes
3 point castle nut wrench
Heavy duty Ergonomic handle
1/2” drive
1/4” drive
7/16″ hex
1/4″ hex
The armorer’s wrench can be used on the following parts of the build process:
Barrel nuts
Castle nuts
Flash hiders
Muzzle brakes
Free float quad rails
Brass Gunsmithing Hammer
Brass head with a wooden handle
9 1/8″ long
Weighs 3 oz.
5/8″ head diameter
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping Restrictions
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
GunBuilders.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.