-
The Harlet (Harlot v3) Parts Kit
The Harlet Parts Kit w/3D printable files on USB drive, barrel, spring, bolts, hex key and nuts. Caliber is .22LR.
- The Harlet is a remix by Black Lotus Colliton of the original Harlot series.
Does not ship to NJ, WA, or internationally.
$29.99 -
M1911 80% Frame: 416 Stainless Steel GI
***Lead time 6 Weeks as vendors catch up***
The M1911 80% Frame – 416 Stainless Steel GI is an unfinished, non-serialized pistol frame designed around classic GI-style 1911 specifications. Machined from 416 stainless steel, this frame is offered in an incomplete state and is not a functional firearm as sold. Ghost Guns Official presents this product with clear specifications, neutral language, and compliance-focused transparency. No tools, instructions, or completion guidance are included. Buyers are responsible for verifying platform compatibility and ensuring compliance with all applicable local, state, and federal regulations prior to purchase.
416 Stainless Steel Government GI ramped 45 ACP only frame. Series 70.
Designed by 1911Builders compatible with Ghost Gunner.
Compatible with either GG3-S or GG3 with free firmware upgrade is required for Steel M1911s.
$210.00 -
ARK 1.0 Build Kit
The ARK 1.0 complete build kit.
The ARK 1.0 Build Kit is a component-based package designed for platform-compatible assembly where legally permitted. This kit is offered as a parts-only configuration and does not constitute a complete or functional firearm as sold. No serialized receiver, firearm, or operational system is included. Ghost Guns Official presents the ARK 1.0 Build Kit with clear specifications, neutral language, and compliance-focused transparency. No tools, instructions, or assembly guidance are provided. Buyers are responsible for verifying platform compatibility and ensuring compliance with all applicable local, state, and federal regulations prior to purchase.
Designed by: Invader Zip
$399.99$449.99ARK 1.0 Build Kit
$399.99$449.99 -
ARK 2.0 Build Kit
The ARK 2.0 complete build kit.
Designed by: Invader Zip
$274.99$319.99ARK 2.0 Build Kit
$274.99$319.99 -
G0 Grip Module
*Lead time is currently 8-10 weeks*
The G0 grip module is a SLS printed grip that the G0 chassis installs into, in order to complete the lower part of the G0 pistol.
This product also includes the G0 Special Parts kit, a series of pins and springs required to secure the G19 LPK into the milled G0 chassis. These are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 Gen 3 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
This grip module is made from high-quality SLS, which is heat resistant and will facilitate G0 longevity. You can also print your own grip module at home using the file available for free at DEFCAD.com.
Note: this product does not include the pins needed to install the assembled chassis into the grip module. These pins are instead included in any G19 Gen 3-style lower parts kit.
$69.99G0 Grip Module
$69.99 -
G0 Build Kit (Without Grip Module)
This product is for customers that have already completed the G0 chassis system with the G0 Starter Kit
The G0 Build Kit (Without Grip Module) is a curated collection of compatible firearm components offered without a grip module for buyers who already own or intend to source that element separately. This kit is presented as a parts-only package and does not constitute a complete or functional firearm. Ghost Guns Official lists the G0 Build Kit with clear specifications, neutral presentation, and compliance-focused transparency. No instructional content, assembly guidance, or tools are included. Buyers are encouraged to verify platform compatibility and all applicable local and state regulations prior to purchase.
Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net
$279.99 -
3D Printing Tool Kit
Package include :
1 x Side pliers
2 x Tweezers (stainless steel)
1 x Pen knife with blades
2 x Double-sided polished bar
1 x File
1 x Separator
1 x Plastic box
$12.993D Printing Tool Kit
$12.99 -
LUTH-AR M16A2 3 Round Burst First Parts Set M-16
ALL NFA RULES APPLY! These LPKs can be legally sold to retail consumers, dealers, and manufacturers, and are intended to be used ONLY as replacement parts for registered receiver weapons and post sample builds by licensed Type 7 FFL holders with an SOT.
LUTH-AR M16A2 3 Round Burst First Parts Set M-16 is a factory-produced collection of fire control components designed for M16A2-style platforms where legally permitted. Manufactured by Luth-AR, this parts set is intended as a replacement or restoration option for compatible configurations. Offered by Ghost Guns Official, the set is presented with accurate specifications, neutral language, and compliance-focused transparency. This product is not a complete firearm and does not include a receiver or serialized components. Buyers are responsible for verifying platform compatibility and ensuring compliance with all applicable laws prior to purchase.
Use of these parts without the proper licensing is a violation of the law! They will NOT be shipped to NJ, CA, CO, NY, WA, and Washington DC
*Allow up to 2 weeks for shipping*
$160.99$170.99LUTH-AR M16A2 3 Round Burst First Parts Set M-16
$160.99$170.99 -
$96.99$119.99KAK K-SPEC Enhanced AR15 Carrier- Downward Vents
$96.99$119.99 -
P320 Carry Grip Module Coyote
SIG P320 Carry Grip Module, Coyote Tan (M17/M18, Manual Safety Cut Optional)
This is the Carry Grip Module (similar to the M17/M18) in Coyote Tan for any P320 FCU. It will fit 9mm, 40SW, 357SIG (Not 45ACP).
Perfect for your custom “M17/M18-clone” P320 build! Accepts 17rd 9mm magazines (or .40/.357 14rd magazines).
No slide catch or additional parts are included.
Includes: 1 Carry-Size 9mm Grip Module (Coyote Tan) with magazine catch.
NOTE: This is a Gen 2 grip and will only work with the Gen 2 slide stop!
$44.99$54.99P320 Carry Grip Module Coyote
$44.99$54.99 -
P320 Full-Size Grip Module Black
SIG P320 Full-Size Grip Module, Black
This is the Full-Size Grip Module in Black for any P320 FCU. It will fit 9mm, 40SW, 357SIG (Not 45ACP). Choose your desired size.
Perfect for your custom P320 build! Accepts 17rd 9mm magazines (or 14rd .40/.357 magazines).
No additional parts are included!
Includes: 1 Full-Size Grip Module (Black) with magazine catch.
$44.99$54.99P320 Full-Size Grip Module Black
$44.99$54.99 -
Wilson Combat Full Grip Module P320 Black
The Wilson Combat Full Grip Module P320 – Black is a premium standalone grip module designed for compatibility with full-size P320 configurations where legally permitted. Manufactured by Wilson Combat, this grip module features refined ergonomics and a durable black finish. It is offered as a non-serialized component and does not include internal parts, a fire control unit, or a complete firearm. Ghost Guns Official presents this product with clear specifications, neutral language, and compliance-focused transparency. Buyers are responsible for verifying platform compatibility and ensuring compliance with all applicable regulations prior to purchase.
$74.99$84.99Wilson Combat Full Grip Module P320 Black
$74.99$84.99